ROM GURUS: SP-Flash Tools

Looking for firmware, Stock ROM or how to go about that phone problem? You are in the right place, get all you want here for free...

Showing posts with label SP-Flash Tools. Show all posts
Showing posts with label SP-Flash Tools. Show all posts

Thursday

How To Unbrick Android Phone Using SP-Flash Tools

3:10 am 1
How To Unbrick Android Phone Using SP-Flash Tools
Have you damage your handheld device software? Do you want to fix it and don`t know how? This simple and effective method will teach you how to unbrick android phones using Sp-flash tools
 
Requirement

* A PC
* USB Cord
* Click here to download and Manually install VCOM drivers on your PC
* Ensure there's an SD card in the phone you wish to flash the files to
* Scatter file + files to be flashed Click here to see how to make an MTK Backup).
* Download SP Flash tool ( Version 5.x  )

Note
If you get any error in SP Flash tool or the phone still didn't work after flashing, I made a list of SP Flash Tool errors, their meanings and how to resolve them click here to see.

Procedure
  • Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there's a formatted SD card in the phone (if there's an SD card slot)
  • Launch SP Flash Tool as Administrator

How-To-Unbrick-Android-Phone-Using-SP-Flash-Tools
  • Click on Scatter-loading by the right
How-To-Unbrick-Android-Phone-Using-SP-Flash-Tools
  •  In the window that pops up, select the scatter file for your phone model then click Open (scatter file is a text file with the word "scatter" in its name
How-To-Unbrick-Android-Phone-Using-SP-Flash-Tools
  •  A list with ticked boxes should appear in SP flash tool (preloader, mbr, ebr etc)
  • Step a,b,c,d,e,f

These steps is only for when you wish to format the phone. Skip if you don't wish to format

  • a. Click Format at the top
  • b. After clicking Format, a dialogue box will pop up, ensure that 'Auto Format Flash' and 'Format whole flash without Boot-loader' are selected
  • c. Click OK, Stop should now be red or green in color
  • d. Connect the switched off phone (with battery inside) to the PC via USB cord
  • e. A progress bar should load till you get a 'Success' message (green circle with OK)
  • f. Disconnect the phone from PC
  • . Uncheck the box in front of any item you do not wish to flash
How-To-Unbrick-Android-Phone-Using-SP-Flash-Tools
  • To manually load an item that doesn't automatically get ticked after loading the scatter file, tick the box in front of that item then double-click its Location and select the corresponding file in the window that pops up
  • Once the file(s) you wish to flash is (are) ticked, click Download (with an arrow above it)
How-To-Unbrick-Android-Phone-Using-SP-Flash-Tools
  • Stop should now be prominent while other options should be grayed out
  • Connect the switched off phone (with battery inside) to the PC via USB cord
  • A progress bar should start running.
How-To-Unbrick-Android-Phone-Using-SP-Flash-Tools
  • Wait till you get a Success message (green circle with OK), do not interrupt before then
  •  Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone
  • Ensure to do a factory reset in recovery mode to clear any errors

Request, Complain and Gratitude

Name

Email *

Message *